I believe that everyone is no stranger to the stone flour mill in daily life, so how to improve the use efficiency of the stone flour mill has become a matter of concern. Today, Zhongyang stone mill electric appliance will give you a brief analysis of the best ways to improve the use efficiency of stone mill flour mill:

1、磨损速度快是由于新磨粉机零部件加工、装配和调整等因素的影响，其摩擦表面粗糙，配合面接触面积较小，表面的承压状况不均。磨粉机在运行过程中，零件表面的凹凸部分相互嵌合摩擦，磨落下来的金属碎屑，又作为磨料，继续参与摩擦，更加速了零件配合表面的磨损。因此，磨合期内容易造成零部件的磨损，磨损速度快。这时，如果超负荷作业，则可能导致零部件的损坏，产生早期故障；

1. The fast wear speed is due to the influence of processing, assembly and adjustment of parts of the new mill. Its friction surface is rough, the contact area of the mating surface is small, and the pressure bearing condition of the surface is uneven. During the operation of the pulverizer, the concave convex parts of the part surface are embedded and rubbed with each other, and the metal debris ground down continues to participate in the friction as abrasive, which further accelerates the wear of the part mating surface. Therefore, during the running in period, it is easy to cause the wear of parts and components, and the wear speed is fast. At this time, overload operation may lead to damage of parts and early failure;

2、发生松动新加工装配的零部件，存在着几何形状和配合尺寸的偏差，在使用初期，由于受到冲击、振动等交变负荷，石磨面粉机以及受热、变形等因素的影响，加上磨损过快等原因，容易使原来紧固的零部件产生松动；

2. The newly processed and assembled parts are subject to geometric shape and fit size deviation. At the initial stage of use, due to the impact, vibration and other alternating loads, the influence of stone mill flour mill, heating, deformation and other factors, coupled with rapid wear and other reasons, it is easy to loosen the originally fastened parts;

3、润滑不好由于新装配的零部件的配合间隙较小，并且由于装配等原因，很难保证配合间隙的均匀性，润滑油不易在摩擦表面形成均匀的油膜，以阻止磨损。从而降低润滑效能，造成机件的早期异常磨损。严重时会造成精 密配合的摩擦表面划伤或咬合现象，导致故障的发生；

3. The lubrication is not good. Due to the small fit clearance of newly assembled parts, and due to assembly and other reasons, it is difficult to ensure the uniformity of fit clearance, and the lubricating oil is not easy to form a uniform oil film on the friction surface to prevent wear. So as to reduce the lubrication efficiency and cause early abnormal wear of parts. If it is serious, it will cause scratch or bite on the friction surface of precision fit, resulting in failure;

4、石磨面粉机发生渗漏现象由于机件的松动、振动和机器受热的影响，机器的密封面以及管接头等处，会出现渗漏现象；部分铸造、加工等缺 陷，在装配调试时难以发现，但由于作业过程中的振动、冲击作用，这种缺 陷就被暴露出来，表现为漏油。因此，磨合期容易出现渗漏现象；

4. Leakage occurs in the stone mill flour mill. Due to the loose parts, vibration and heating of the machine, leakage will occur on the sealing surface and pipe joints of the machine; Some casting, processing and other defects are difficult to find during assembly and commissioning, but due to the vibration and impact during operation, such defects are exposed as oil leakage. Therefore, leakage is easy to occur during running in period;

5、操作失误多由于对机器的结构、性能的了解不够，容易因操作失误引起故障，甚引起机械事故。

5. Most of the operation errors are due to insufficient understanding of the structure and performance of the machine, which is easy to cause faults and even mechanical accidents.

大家在使用石磨面粉机的同时要注意以上几点，提高其使用效率，延长使用寿命。

While using the stone flour mill, we should pay attention to the above points to improve its use efficiency and prolong its service life.