石磨面粉机的使用寿命往往是客户非常关心的问题。实际上由于没什么易损部件，石磨面粉机并不容易受到损坏，因此使用寿命较长。而在使用过程中恰当使用则可以有用的延长石磨面粉机的使用寿命。

The service life of stone flour mill is often a problem of great concern to customers. In fact, because there are no vulnerable parts, the stone flour mill is not easy to be damaged, so it has a long service life. And in the use process, the proper use can be useful to extend the service life of the stone mill flour machine.

石磨面粉机的使用寿命决定因素有很多，一方面是机器本身的质量，另一方面，就是在生产过程中的操作是否符合规范。一般用作石磨面粉机磨盘的都是绿色砂石岩，砂岩可以在机器的长期使用中不掉色、不掉渣。并且石磨面粉机的寿命也不能单纯以时间长短来决定，而是根据其加工量的多少来判定。

There are many decisive factors for the service life of stone flour mill, on the one hand, the quality of the machine itself, on the other hand, whether the operation in the production process is in line with the specification. Generally used as the grinding plate of stone mill flour machine is green sandstone, sandstone can not fade in the long-term use of the machine. Moreover, the service life of the flour mill can not be determined by the length of time alone, but by the amount of processing.

如果石磨面粉机长时间处于高负荷的运转状态下，那负荷强度越大，受磨损的程度也就会越大，不加以制止的话，设备使用寿命会大大缩短。当石磨磨小麦达到十万斤左右的时候，磨盘就需要打磨了，牙齿已经不够锋利了。所以要求操作人员平时一定要做好检查和保养，尽量制定好一个加工计划，将时间合理的安排起来，使设备处于正常状态下，这样可以有用延长石磨面粉机的使用寿命。

If the stone mill is in high load operation for a long time, the greater the load intensity is, the greater the degree of wear will be. If it is not stopped, the service life of the equipment will be greatly shortened. When the stone grinding wheat reaches about 100000 Jin, the grinding plate needs to be polished, and the teeth are not sharp enough. So the operator must do a good job of inspection and maintenance, try to make a good processing plan, arrange the time reasonably, so that the equipment is in a normal state, which can effectively extend the service life of the stone flour mill.

对面粉机械的配件的距离进行调 理，可以削减冲突表象的呈现。而高温环境也会进步冲突力，因而，恰当的降低工作温度，就可以削减磨损。关于面粉机械简单磨损的部位进行杰出的光滑，就可以削减冲突力过大然后形成磨损表象的呈现。

Adjusting the distance of flour machinery accessories can reduce the appearance of conflict. And the high temperature environment will also improve the conflict force, therefore, properly reduce the working temperature, you can reduce wear. On the flour machinery simple wear parts for outstanding smooth, can reduce the conflict force is too big, and then form the appearance of wear.